thanks guys!!
the Project was aimed at learning how to build a Wood foil and learn vaccum lamination.
I must confess that i enjoyed it obsesively for the last month.
the lamination is the trickiest part to get the mirror finish but i guess perfection will come with practice.
can the bubles be filled by drilling a small hole and injecting resin?
all the wings are 0 degreed in triming.
i hace built several PET shims from coke bottles to increase angle of wings.
it will be very hard to find someone that rides a foil in these parts of the countryside.
i ve seen all the videos i could find and the only way to learn ist to spend some time on it!
i hope im a fast learner
.
I ran out of carbón and resin so this design will have to do for now.
Specs came out like this:
the hole setup with board is 7.1 kilos
front wing is 756 cm2 x 170mm chorr lenght.x 470cm span x 9mm chord thickness.
back wing is 360cm2 x 110mm chord lenght x 400cm span x 9mm chord thickness.
fuselaje cameout at 730mm from tip to tip x 60mm tall x 32mm wide.
strut is 24.5mm thickness x 142mm chord x 870mm tall.
foil is epller 817 on keel and half half on wings.
all winggs are trimmed at 0 degree.
vessel will be name Helena after my litle daughter
.
She has enjoyed seen me built her plane.!! her words.
Will ride thiss weekend and shoot video.
hope to get feedback from teh video from experienced riders.
Next Project:
slimer everything from keel to wings.
Pedro.