There's 2 -3 avenues here.rynhardt wrote:I've also been thinking about building my own pump, geared especially toward travelling. Some features that I'd like:
1. Compact when packed in luggage. Ideally a closed cylinder with the piston, handle, shaft and tube all packed neatly inside. Maybe use a foot strap instead of a plastic base to stand on. I don't mind a bit of assembly once I arrive at my destination.
2. Easy pumping. Go for a smaller diameter piston and a longer cylinder to reduce the pumping force needed at higher PSI. Consider single action pump where pumping is done only on the down stroke. Having to pull up against the pump tends to hurt my back more.
3. Easy maintenance. Maybe have a replacable paper filter on the intake. Use something like silicon for the hose, not the corrugated crap that is usually sold. Make it easy to replace the piston O-ring seal. Make it easy to lube the inside once I arrive at my destination, and easy to clean out lube/sand once I go back home and pack everything back inside.
I reckon I can build a basic single-action pump from easily sourced material such as PVC drain pipe, aluminium tube, plumbing fittings and a large O-ring.
Users browsing this forum: Bing [Bot], tomato and 25 guests