Forum for kitesurfers
-
Kitekiller
- Rare Poster
- Posts: 3
- Joined: Sun Apr 06, 2014 8:38 pm
- Gear: Cabrinha Switchblade 2012, 10m
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Kitekiller » Sun Apr 06, 2014 10:35 pm
Hi everyone
I had a bad incident happen to me recently. My kite lines got sucked in by a jetski. Not just did i have to buy a new bar , but the lines on the kite itself was ripped off as well!!
I have a 2012 Cabrinha switchblade 10m kite, but cant find the line lengths anywhere I would really appreciate if some one who has the same kite can maybe make a measurement of the rear end attachment lines, from the kite to the start of the pigtail.
Any help would be appreciated!
Thomas
-
Attachments
-
-
experienced1
- Very Frequent Poster
- Posts: 930
- Joined: Fri Jun 06, 2003 5:32 pm
- Gear: Cabrinha
- Brand Affiliation: Cabrinha
- Location: Cabrinha Old Guy
-
Has thanked:
0
-
Been thanked:
0
Postby experienced1 » Sun Apr 06, 2014 10:39 pm
visit
www.cabrinhakites.com, click on gear, then go to spare parts and click on 2012, SB.
That way you'll not only kinw what you need, but the official name annd part #
steve
-
Kitekiller
- Rare Poster
- Posts: 3
- Joined: Sun Apr 06, 2014 8:38 pm
- Gear: Cabrinha Switchblade 2012, 10m
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Kitekiller » Sun Apr 06, 2014 11:04 pm
Cheers Steve
I have had a look, but same as the picture I attached they don't have a number for the piece of line I'm looking for.
-
tr3v
- Frequent Poster
- Posts: 203
- Joined: Sat Jan 03, 2009 10:00 pm
- Gear: BWS, CSA Surfboards, Sirocco
- Brand Affiliation: None
- Location: New Zealand
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby tr3v » Sun Apr 06, 2014 11:50 pm
Kitekiller wrote:Cheers Steve
I have had a look, but same as the picture I attached they don't have a number for the piece of line I'm looking for.
Not very helpful but that line is included with #5 ("bridle replacement set"):-
http://www.cabrinhakites.com/switchblad ... parts.html
-
dyyylan
- Very Frequent Poster
- Posts: 1754
- Joined: Sun Jan 02, 2011 11:45 pm
- Gear: N/A
-
Has thanked:
0
-
Been thanked:
1 time
Postby dyyylan » Mon Apr 07, 2014 2:11 am
If you talk to any cabrinha shop they should be able to get you the parts you need
-
Kitekiller
- Rare Poster
- Posts: 3
- Joined: Sun Apr 06, 2014 8:38 pm
- Gear: Cabrinha Switchblade 2012, 10m
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Kitekiller » Mon Apr 07, 2014 3:43 am
tr3v
Thanks for the help man really appreciate it!
Think a new bridal replacement set is what I need!
Thomas
-
experienced1
- Very Frequent Poster
- Posts: 930
- Joined: Fri Jun 06, 2003 5:32 pm
- Gear: Cabrinha
- Brand Affiliation: Cabrinha
- Location: Cabrinha Old Guy
-
Has thanked:
0
-
Been thanked:
0
Postby experienced1 » Tue Apr 08, 2014 5:29 pm
Kitekiller:
sorry about that. If all you need is that one piece, you can make it. expensive to replace the entire bridle for that one piece. Where RU located? If in the USA, I'll look thru my stash and provide the material if you pay for the shipping. All i need to know is how long is the pice you need...measure the one of the other side.
Or, as already suggested, go/call a shop near you and tell them what you need. They should have a piece of line that will take care of the problem.
PM mail me if you like
steve
Return to “Kitesurfing”
Who is online
Users browsing this forum: Bing [Bot], Blackened, Brent NKB, chet, DanielorDani, duddd, eloico, FunOnTheWater, i_love_storm, lightwind, MKM, ReThink, Slappysan, Trent hink, universalflush, Ventum, Vivo3d, WindeeGuy and 411 guests