Contact   Imprint   Advertising   Guidelines

Bridal wear

Forum for kitesurfers
User avatar
Lanc
Frequent Poster
Posts: 210
Joined: Fri Sep 09, 2011 7:13 am
Local Beach: Kite Beach, Cape Town
Favorite Beaches: Paje, Zanzibar
Green Island, Antigua
Low Bay, Barbuda
Style: Wave and Old School
Gear: Switchblade/Nomad/Drifter/Pivot/Rebel/Nitro
Underground FLX 132
F-One Mitu Monteiro Pro
Brand Affiliation: None
Location: Kitebeach, Cape Town
Has thanked: 0
Been thanked: 11 times

Bridal wear

Postby Lanc » Fri May 09, 2014 12:47 pm

I noticed a section of my bridle was quite frayed after my last session. Kite is 2013, 18 months old and had about 25 sessions on it. This is the first time I've had any sort of wear on a bridle. I usually replace each kite size every three years so this one is only half way through its expected life with me.

Question is do I do I replace the entire bridle because of stretching or just the part that is worn? The rest of the bridle looks good. At what stage or age to bridles usually start to wear?
20140505_1559445.jpg

User avatar
NYKiter
Very Frequent Poster
Posts: 2057
Joined: Fri Mar 22, 2013 9:17 pm
Style: Wave
Gear: .
Has thanked: 11 times
Been thanked: 26 times

Re: Bridal wear

Postby NYKiter » Fri May 09, 2014 1:27 pm

Holy shit, looks like a squirrel was gnawing on it. I wouldn't be caught dead flying a bridal like that. Looks abnormal to me. Get that replaced ASAP (dont bother with the rest of the bridal). Never had a bridal wear that quick, they usually last for years and only the ones exposed to pulleys wear and it takes months to fray..

User avatar
william_rx7
Medium Poster
Posts: 165
Joined: Thu Aug 24, 2006 2:16 am
Location: TO
Has thanked: 0
Been thanked: 0

Re: Bridal wear

Postby william_rx7 » Fri May 09, 2014 1:41 pm

Image
:lol:

User avatar
ITN
Medium Poster
Posts: 103
Joined: Tue Jul 29, 2008 7:24 pm
Gear: Reo 2016 7m 9m 12m
Brand Affiliation: None
Has thanked: 0
Been thanked: 1 time

Re: Bridal wear

Postby ITN » Fri May 09, 2014 2:06 pm

Ideally bridal wear is only meant to be used once. It can be very expensive if you do require a replacement.

User avatar
balugh
Frequent Poster
Posts: 309
Joined: Thu Feb 12, 2009 10:52 am
Local Beach: Hunstanton, Brancaster, and other beaches in Norfolk
Favorite Beaches: ...I need to travel more...:-(
Style: Free ride
Gear: Flysurfer Speed 3 15M
North Rebel 11M
North Rebel 8m
Ozone Light 7m
Spleene Session 140
SuperShinn 135
Brand Affiliation: www.kite-eze.com
Location: Norfolk, UK
Has thanked: 0
Been thanked: 0
Contact:

Re: Bridal wear

Postby balugh » Fri May 09, 2014 2:21 pm

:D
Attachments
image.jpg

User avatar
edt
Very Frequent Poster
Posts: 7319
Joined: Fri Jul 16, 2010 6:27 am
Kiting since: 2010
Local Beach: Michigan
Gear: ride hard, no regrets
Has thanked: 530 times
Been thanked: 666 times

Re: Bridal wear

Postby edt » Fri May 09, 2014 2:37 pm

Only replace the worn section bridles last for years except for the parts that rub against a pulley those wear out in a hundred or two sessions

fourperf
Frequent Poster
Posts: 338
Joined: Mon Jan 26, 2004 4:27 am
Brand Affiliation: None
Has thanked: 0
Been thanked: 1 time

Re: Bridal wear

Postby fourperf » Fri May 09, 2014 9:46 pm

I would replace only the worn part also and check that the pulley is turning freely and not jammed up with sand and/or corrosion. That is probably the source of the wear.
Mark


Return to “Kitesurfing”

Who is online

Users browsing this forum: alford, Baidu [Spider], Bing [Bot], Brent NKB, buzzz, CaptainKook, chidism, Kemperman, lifeinthehood, Majestic-12 [Bot], Yahoo [Bot] and 208 guests