Here you can exchange your experience and datas about your home build boards
-
NYKiter
- Very Frequent Poster
- Posts: 2057
- Joined: Fri Mar 22, 2013 9:17 pm
- Style: Wave
- Gear: .
-
Has thanked:
11 times
-
Been thanked:
26 times
Postby NYKiter » Wed Feb 03, 2016 2:51 am
careful of ebay purchases of tear aid, the adhesive will fade on some batches.
also, as an fyi E6000 glue does not work on bladders.
-
kiteaid
- Medium Poster
- Posts: 79
- Joined: Wed Apr 01, 2009 2:34 pm
- Gear: Epic Kites
- Brand Affiliation: www.kiteaid.com
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby kiteaid » Thu Feb 04, 2016 6:57 pm
At KITEAID we do not use Tear-Aid as we found this product too hard to manipulate. It tends to stretch and fold on itself when trying to apply it. This can lead to wrinkles/leaks.
Also, our valve sealant works great for repairing small pin holes in bladders or re-attaching de-laminated valves.
www.kiteaid.com
Stephan
-
Claves
- Rare Poster
- Posts: 9
- Joined: Wed Mar 16, 2016 8:14 pm
- Local Beach: Lynæs
- Favorite Beaches: Witsand SA
Maanskai Baai ( on a good day ) ;-)
Sunset Beach
Farø Bridge
- Style: Allround
- Gear: CORE KITES XR and the Eleveight Master board.
- Brand Affiliation: None
- Location: Danmark
-
Has thanked:
0
-
Been thanked:
1 time
-
Contact:
Postby Claves » Wed Mar 16, 2016 8:20 pm
Hi Guys.
Is it possible 2 use smoke in the bladder when looking for holes ???
Best Regards
Claus Westrup
Kite Danmark -
Kiteboard -
Kitesurfing Udstyr -
Begynderkite
-
Peert
- Very Frequent Poster
- Posts: 513
- Joined: Thu Jun 20, 2013 10:38 am
- Local Beach: Kijkduin, IJmuiden, Schellinkhout, Wijk aan Zee, Marina, Mirns.
- Style: Freeride
- Gear: Best Roca 4m, Naish Boxer 6 and 9m, GA Pure 8m Naish Trip 10m, Gong strutless 11m Modded Waroo 14m.
Mako 135x38 Mako 140x40 & Mako King 165x45, Crazyfly Bulldozer, T40 Moses Vorace Hydrofoil + Gong Wings
- Brand Affiliation: None
- Location: Amsterdam
-
Has thanked:
13 times
-
Been thanked:
23 times
Postby Peert » Wed Mar 16, 2016 11:11 pm
Well, never tried this or heard/read a out it, but the smoke should be so dense that even a pinhole would be revealed. Imagine a needle made out of smoke. Would you spot it? And this imaginary needle would fade out very quickly being so thin...
It would work fine for holes with diameters above a centimeter I guess....
-
edt
- Very Frequent Poster
- Posts: 7330
- Joined: Fri Jul 16, 2010 6:27 am
- Kiting since: 2010
- Local Beach: Michigan
- Gear: ride hard, no regrets
-
Has thanked:
533 times
-
Been thanked:
668 times
Postby edt » Thu Mar 17, 2016 12:59 am
sure why not!
How exactly are you getting smoke into the kite. I assume you dont want to use actual fire to create smoke all it takes is the tiniest of floating ash or ember and POP the bladder is done. So i guess . . . CO2 attached to the intake of your pump? Anyway you do it, sure seems harder than soapy water.
-
Claves
- Rare Poster
- Posts: 9
- Joined: Wed Mar 16, 2016 8:14 pm
- Local Beach: Lynæs
- Favorite Beaches: Witsand SA
Maanskai Baai ( on a good day ) ;-)
Sunset Beach
Farø Bridge
- Style: Allround
- Gear: CORE KITES XR and the Eleveight Master board.
- Brand Affiliation: None
- Location: Danmark
-
Has thanked:
0
-
Been thanked:
1 time
-
Contact:
Postby Claves » Sat Mar 19, 2016 9:02 pm
I was thinking about a smoke machine like the ones u use at the disco
Best Regards
Claus Westrup
Kite Danmark -
Kiteboard -
Kitesurfing Udstyr -
Begynderkite
-
Claves
- Rare Poster
- Posts: 9
- Joined: Wed Mar 16, 2016 8:14 pm
- Local Beach: Lynæs
- Favorite Beaches: Witsand SA
Maanskai Baai ( on a good day ) ;-)
Sunset Beach
Farø Bridge
- Style: Allround
- Gear: CORE KITES XR and the Eleveight Master board.
- Brand Affiliation: None
- Location: Danmark
-
Has thanked:
0
-
Been thanked:
1 time
-
Contact:
Postby Claves » Sat Mar 19, 2016 9:04 pm
Peert wrote:Well, never tried this or heard/read a out it, but the smoke should be so dense that even a pinhole would be revealed. Imagine a needle made out of smoke. Would you spot it? And this imaginary needle would fade out very quickly being so thin...
It would work fine for holes with diameters above a centimeter I guess....
I dont know, but if the dense of the smoke is heavy then why not. ??
Best Regards
Claus Westrup
Kite Danmark -
Kiteboard -
Kitesurfing Udstyr -
Begynderkite
-
kiteaid
- Medium Poster
- Posts: 79
- Joined: Wed Apr 01, 2009 2:34 pm
- Gear: Epic Kites
- Brand Affiliation: www.kiteaid.com
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby kiteaid » Thu Mar 24, 2016 6:20 pm
I think the method of rubbing soapy water applied using a 2$ spray bottle is by far the easiest way to find leaks.
My 2 cents.
Stephan
-
eduardo graf
- Rare Poster
- Posts: 26
- Joined: Tue Apr 13, 2004 4:58 pm
- Local Beach: Praia Rasa, Buzios, Brazil.
- Style: Kitewave,
- Gear: Naish
- Brand Affiliation: Naish
- Location: Brazil
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby eduardo graf » Sun Apr 03, 2016 11:18 pm
A friend of mine asked me to fix his bladder on a Cabrinha Kite. He said the vinil glue is not working as there is a different type of bladder in his leading edge. (board of attack). I took the bladder out and noticed its a different type of plastic, harder and kind of pink... The main air valve disconnected from the bladder and vinil glue is not woorking.... He works as a lifeguard and does not want or have the money to buy new bladders. How can I help, any ideas? Apreciate, thanks!
-
GregK
- Very Frequent Poster
- Posts: 690
- Joined: Sat Jul 24, 2010 6:22 am
- Kiting since: 2000
- Local Beach: Comox, BC
CANADA
- Style: Average
- Gear: Lift V2 Surf & HA wingsets
Ocean Rodeo kites & wings
- Brand Affiliation: started Comox Kite Repair
- Location: Comox, BC CANADA
-
Has thanked:
56 times
-
Been thanked:
136 times
Postby GregK » Mon Apr 04, 2016 4:18 am
Sounds like your friend has an Airtime Kite (
http://www.airtimekite.com/ ) orange bladder, an after-market replacement bladder made from a composite of two different plastic films that they discontinued a few years back.
Contact Airtime, they may still have some stick-on valves for orange bladders. Regular TearAid and from the sound of it polyurethane glue won't stick to the orange bladders, different plastic.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 148 guests