Contact   Imprint   Advertising   Guidelines

breather ?

here you can exchange your experience and datas about your home build boards

Rare Poster
Posts: 47
Joined: Thu Apr 10, 2003 9:25 am
Kiting since: 0
Brand Affiliation: None
Location: israel

breather ?

Postby trozen » Mon Apr 25, 2005 6:16 am

which should be the best 2 use ?

Frequent Poster
Posts: 427
Joined: Tue Aug 06, 2002 1:00 am
Kiting since: 0
Brand Affiliation: None
Location: Sto. Domingo, Dominican Rep.

Postby chassan » Mon Jun 20, 2005 2:41 pm

The first board I made was using a layer of Peel Ply ( is called Econoply at and a layer of breather, it didn't work well for me, so since then I'm using 2 layers of the Econoply and is working perfectly.
Here's the link ... gging.html

Rare Poster
Posts: 16
Joined: Fri May 27, 2005 1:34 pm

Postby sailrtnow » Tue Jun 21, 2005 4:47 pm

This is the release fabric I use, and it comes off every time. ... &BANNERID=
I just do my layup and put a sheet of release fabric and then a layer of breateher fabric then put it in the bag. If your release is sticking try using more breather fabric.

Medium Poster
Posts: 158
Joined: Mon Dec 05, 2005 4:44 pm

Postby crabman » Mon Dec 19, 2005 6:30 pm

If you cant get a release film ,plastic bin liners are good .If you want to bleed resin through it put small holes in it.

Return to “Board Builders”

Who is online

Users browsing this forum: No registered users and 4 guests