Thanks for the kind words about he board.
I was riding a surfboard before I got on a race board. You'd think it would be an easy transition, but it's much different. Almost felt like I was learning to kite all over again. If you do end up making a raceboard, make sure to get the foot straps in the correct position. Makes all the difference in how the board will ride.
Didn't get a chance to weigh before everything was on. Board with pad, straps, fins it comes in at 20 lbs. I don't think that's real heavy, but it not exactly light either. The new race board coming out now are in the 12-13lb range without fins.

If memmory serves around 7.5-8kg bare deck so way heavy. I'm not sure on that though it may be lower then finished weight. I'm interested to see how the 1lb holds up.

Big thanks again to Garry Menk at kiteracing.com for his information and advice on the design and building technique.

Raceboard round 2.
189cm x 70cm, 2lb eps core, Carbon rails, 2mm paulownia wood bottom, vac bagged. Learned a lot from my first build. This one came out much better in my opinion. Foot strap placement can make so much difference in how the board rides. Got this one pretty close on the first try. Just had to move the front strap back a couple of holes on the inserts. If you use the measurements that Garry suggest you'll have a good start.
http://kiteracing.com/forum/index.php?topic=778.0

Looks cool!
Is the deck all glass or is there a sandwich layer in the deck patch area?
Hard to tell from picture, can you divulge the layup?
Thinking about venturing into EPS cored boards myself....

Layup
RR epoxy
deck- 2 layers 4oz glass full length of board wrapped over carbon rails.
-1 layer 4 oz 3/4 deck patch
-2 additional 4oz patches at 45deg over footstrap inserts and fin boxes.
bottom -1 layer 4oz under with 2 layers os 4oz around fin boxes
2mm paulownia wood
-layer 4oz over.
carbon rail are 8oz woven carbon fiber. Probably could have gone with 6oz, but got a good deal on the 8oz.
My idea was to keep it somewhat light and put the additional glass in the areas that take more abuse.

The different color on the deck is the traction additive. I just used some epoxy paint nonskid additive to some RR epoxy. Rolled it on with a paint roller. Works great.

Nice. Looks light and solid. Still working on cleaning and rebuilding my shaping room.

That thing is cool. Hope it serves you well!
Wish I could get paulownia more easily here in US

Paulownia is pretty hard to find. A couple of guys making surfboards on swaylocks sourced paulownia strips from Ikea blinds. I've used them on several boards now and had great results. I'll have to post a pic of the bottom of that board. Used these strips:
http://www.ikea.com/us/en/catalog/products/10117518/.

I think I may have found a palwina vainer supply in Wisconsin.

blinds, that's brilliant!
I knew there had to be something in the space between cheap asian junk furniture and overpriced raw planks!
gbleck, I'm all ears if you care to post or pm that info... Hope it pans out!
I like working with cedar, but eventually too much gets in my nose, then the project becomes a pain until sealed...