*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 66 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7  Next
Author Message
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Sun Dec 09, 2012 2:47 pm 
Offline
Medium Poster
User avatar

Joined: Mon Oct 18, 2010 10:47 pm
Posts: 133
Toby just get a Contour.
If Stringy says it doesn't fog well... I prefer a little less res and options than taking care of fog all the time.


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Sun Dec 09, 2012 4:02 pm 
Offline
Very Frequent Poster
User avatar

Joined: Tue Sep 12, 2006 2:10 am
Posts: 994
Location: Nassau,Bahamas
Toby wrote:
Maybe gopro should offer a bigger housing, which will have more air inside, so it takes longer to heat it up?

And why does it fog right at the lense? Maybe do in the back of the housing a part which would attract the fogging, so the front stays clear?


the housings are to big as it is now, anything bigger would be silly to hang on your kite lines or ontop of your helmet what Go pro need to do is just make there camera water proof so you don't need the silly housing, but, i know they make allot of money from there accessories that's not going to happen. I thought i was the only person that thought it fogging only from the lense is crazy.


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Sun Dec 09, 2012 4:41 pm 
Offline
Frequent Poster
User avatar

Joined: Wed Oct 31, 2012 11:08 pm
Posts: 400
Location: Venice, Florida
prayfawind27 wrote:
I've just bought my de fogging strips haven't had a chance to use them yet but from all these post I am afraid, if they don't work I will be selling all my go pro shits, put in oven, spray on this spray on that, try this, try that, that's way to much hassle just for a couple of hours of recording that will turn into couple of minutes after editing,


There is no hassle after making sure the case is not leaking. I did a little preventative maintenance when I got the camera, and I literally have not had it fog up once. Ever. The only pain in the ass that could happen is if the button o-rings needed to be replaced, and that would take about 20 minutes, and possibly 10-11 curses. :lol: If everything is solid and you don't have any seepage, you don't need any strips or any over the top procedured for preparing the camera for use, just buy one small bottle of Rain-X anti fog (i think the label is black). It's meant to use on the interior of your car windows to stop them fogging up, and it works pretty damned well at that. Put it on your bathroom mirror, and that won't fog up either. Anyway, put that on the inside of the lens, and it will last for months. I have changed memory cards on the beach on a rainy day, and zero problems. But, if you want to go out and blow several hundred dollars to solve a simple problem, feel free.


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Sun Dec 09, 2012 11:50 pm 
Offline
Medium Poster

Joined: Fri Aug 03, 2012 6:16 pm
Posts: 61
Rain X works,,, However Go pro needs to improve... Competition is coming... Fast


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Mon Dec 10, 2012 12:21 am 
Offline
Frequent Poster
User avatar

Joined: Wed Oct 31, 2012 11:08 pm
Posts: 400
Location: Venice, Florida
knotmyfault wrote:
Rain X works,,, However Go pro needs to improve... Competition is coming... Fast


Well duh! Everything needs to improve, until such time as the concept is technologically obsolete. The statement "X needs to improve" could be said of any product on earth. :lol:

That being said, the action photography field is seeing new entrants constantly, which is why GoPro needs to innovate and keep the pressure on to stay competitive. :thumb:


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Mon Dec 10, 2012 2:27 am 
Offline
Very Frequent Poster

Joined: Fri Oct 21, 2005 11:35 am
Posts: 1700
I have not used my GoPro in the water much but when I did I blasted the car air conditioner on high into the case then closed it. It did not fog.

I am sceptical of claims for different brands not fogging. The only way they can stop fogging is to have the inside of the lens completely sealed from the outside air, and possibly filled with an inert gas (like high end binoculars and rifle scopes). I am not aware of any camera lenses that are nitrogen filled.

Fogging is simple physics. Water vapour comes into contact with a cold surface and condenses. The glass lens conducts heat faster than the surrounding plastic so it gets cold and that is where you get condensation.

The only way to eliminate fogging is to get rid of the water vapour. That is what the air conditioner trick does and what the desiccants do.


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Mon Dec 10, 2012 4:27 am 
Offline
Very Frequent Poster

Joined: Fri Sep 11, 2009 3:15 am
Posts: 1510
Does gopro 3 black edition fog up? i really want to know

i think gopro 2 lowered the power used so less heat... maybe more resolution 120-fps uses more current and generates more heat - hope not - i a was hoping to me one of teh 10002343434 people that are about to make a slomo kite video lol


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Mon Dec 10, 2012 6:01 am 
Offline
Frequent Poster
User avatar

Joined: Wed Oct 31, 2012 11:08 pm
Posts: 400
Location: Venice, Florida
longwhitecloud wrote:
Does gopro 3 black edition fog up? i really want to know

i think gopro 2 lowered the power used so less heat... maybe more resolution 120-fps uses more current and generates more heat - hope not - i a was hoping to me one of teh 10002343434 people that are about to make a slomo kite video lol


I don't know about the others, but the 2 still gets pretty hot in the case. The anti-fog Rain-X, I'm telling you.

http://www.carid.com/universal-detailing/rain-x-anti-fog-1224047.html?utm_source=googlebase_com&utm_medium=comparator&utm_campaign=Google_feed&CAWELAID=1509040471&nid=PLA&"cagpspn=pla"&gclid=CN7SxvGGj7QCFQ2znQodaGMAtA

One drop on a piece of toilet paper, wipe down the inside of the plastic housing lens and the outside of the camera's glass lens. Let it dry for 5 seconds, then polish it with a dry piece of TP to remove any streaks. Whole procedure takes less than 20 seconds. Crystal clear for a month. :thumb:


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Mon Dec 10, 2012 3:31 pm 
Offline
Medium Poster

Joined: Wed Oct 22, 2008 4:00 pm
Posts: 70
Location: Costa Del Morayfirth
That rain x stuff does work , never tried the anti fog but it must be worth a try .


Top
Profile
 Post subject: Re: GoPro 3 - fogging?
PostPosted: Mon Dec 10, 2012 3:40 pm 
Offline
Very Frequent Poster
User avatar

Joined: Fri Jan 09, 2009 4:49 am
Posts: 3646
Location: Japan
Flight Time wrote:
longwhitecloud wrote:
Does gopro 3 black edition fog up? i really want to know

i think gopro 2 lowered the power used so less heat... maybe more resolution 120-fps uses more current and generates more heat - hope not - i a was hoping to me one of teh 10002343434 people that are about to make a slomo kite video lol


I don't know about the others, but the 2 still gets pretty hot in the case. The anti-fog Rain-X, I'm telling you.

http://www.carid.com/universal-detailing/rain-x-anti-fog-1224047.html?utm_source=googlebase_com&utm_medium=comparator&utm_campaign=Google_feed&CAWELAID=1509040471&nid=PLA&"cagpspn=pla"&gclid=CN7SxvGGj7QCFQ2znQodaGMAtA

One drop on a piece of toilet paper, wipe down the inside of the plastic housing lens and the outside of the camera's glass lens. Let it dry for 5 seconds, then polish it with a dry piece of TP to remove any streaks. Whole procedure takes less than 20 seconds. Crystal clear for a month. :thumb:

Went looking at the hardware store today for Anti-Fog Rain-X... they don't sell it here, it seems :o there were anti-fog wipes for the interior windows... might have to try them :-/

They DO sell stuff for mirrors that is hydrophobic - water just jumps right off. I might try that too...


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 66 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Yahoo [Bot] and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group