*


All times are UTC + 1 hour



Post new topic Reply to topic
 [ 9 posts ] 
Author Message
 Post subject: bandit dos line lengths
PostPosted: Sun Sep 01, 2013 2:11 pm 
Offline
Rare Poster

Joined: Sun Sep 01, 2013 1:40 pm
Posts: 5
hi all, having BIG problems with my bandits since i snapped a back line....the new lines were longer than the old but this added up to the length of the leader on the bar...so skipped this out and had no end of flying problems since! i read somewhere that the difference in length between the front and rear lines should be 3 mtrs, mine measure 2.2 mtrs. now i'm no expert but could the front lines possibly stretch 80cm and if so would it fly at all??? or am i missing something in the measuring? i'm literally staking the bar into the sand on full power and stretching the lines out together to measure the difference between front and rear when their ends are together! SO what should be the difference in line lengths please? its beginning to get life threatening out there!


{ SHARE_ON_FACEBOOK } { SHARE_ON_TWITTER } { SHARE_ON_ORKUT } { SHARE_ON_DIGG } { SHARE_ON_MYSPACE } { SHARE_ON_DELICIOUS }
Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Sun Sep 01, 2013 3:19 pm 
Offline
Medium Poster
User avatar

Joined: Sat Apr 09, 2011 1:15 pm
Posts: 138
I may have been the one that said 3 meter difference between front and rear lines, but that was an estimate, not intended to be a real measure. Also, that referred to a 2011 Naish Universal bar. Naish makes other bars that may have more or less length between power and steering lines, and other brands all may have different lengths between power and steering lines. It depends on where the Y is, if there is a swivel or not, and the emergency flagging method the bar uses. You must assume it is different from brand to brand.

Use your old lines and bar as a starting point for making new lines. If your bar is like most, all 4 lines ends will be at the same distance from the bar when fully sheeted in (and no depower is engaged). The leader lines and where the Y is will dictate how long the new lines need to be. Some brands run long leader lines off the bar, allowing all four lines to be same length.


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Sun Sep 01, 2013 4:38 pm 
Offline
Rare Poster

Joined: Sun Sep 01, 2013 1:40 pm
Posts: 5
thanks for the reply, the new back lines are the same length from the bar as the originals but wasn't sure if the front lines had stretched! on re measuring on full power and with the bar pulled back to the chicken loop this time its only 25 cm out of your 3mtr guesstimate. new lines are quoted as friont 24mtrs, top power 9 mtrs and bottom power 12mtrs! i suppose this leaves a three mtr difference?


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Sun Sep 01, 2013 8:00 pm 
Offline
Rare Poster

Joined: Sun Sep 01, 2013 1:40 pm
Posts: 5
ok southflorida i think i know where you're coming from now! all the lines from the bar to the leading edge and the back of the kite need to be the same length when fully powered and the bar pulled back to the chicken loop!!! right? ..........back to the beach.


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Mon Sep 02, 2013 7:23 am 
Offline
Medium Poster
User avatar

Joined: Fri Oct 08, 2010 2:20 pm
Posts: 155
Best solution is to buy a newer Bandit model :D
Seriously, The Bandit advanced sooooo much since the Dos.

I would recommend writing an email to F.one, surely they will give you the answer you are looking for.


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Mon Sep 02, 2013 7:57 am 
Offline
Medium Poster

Joined: Wed Feb 17, 2010 4:10 pm
Posts: 126
Location: Tarifa
Could you lay the kite out and measure the difference between the front and rear bridles, that should give you the difference between the front and back lines? Let me know if you haven't solved this as I had a friend who had a Bandit dos so I can ask her.


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Mon Sep 02, 2013 3:10 pm 
Offline
Rare Poster

Joined: Sun Sep 01, 2013 1:40 pm
Posts: 5
yea i did email f one but no reply as of yet, about to measure the bridal difference that should do it..thanks for all your help! oh, and as for buying the new bandit i would but im skint and they' re soooo expensive.


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Wed Sep 04, 2013 1:43 am 
Offline
Rare Poster

Joined: Fri Sep 28, 2012 12:17 am
Posts: 4
Hi el bandito ,
B Dos Line lengths are as follows .
Kites 4.5 through 16m : Back Lines 24m , Bottom Front ( two sections ) 11m , top front 10m.
Hope this helps .
Bruce


Top
Profile
 Post subject: Re: bandit dos line lengths
PostPosted: Wed Sep 04, 2013 9:13 pm 
Offline
Rare Poster

Joined: Sun Sep 01, 2013 1:40 pm
Posts: 5
Thanks Bruce, there is a 3 mtr difference then! So would that be on full power with the bar pulled right back ( sheet in)? Or pushed forward( sheet out)?


Top
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic
 [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: av_dumitrascu, Bing [Bot], darippah, Dimitri M, doc, ThickAir, Yahoo [Bot] and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group