Contact   Imprint   Advertising   Guidelines

Kite Manufacturing - free feedback

forum for kitesurfers


evan
Frequent Poster
Posts: 283
Joined: Sat Jan 31, 2004 5:48 pm
Kiting since: 2002
Local Beach: Brouwersdam
Style: Hydrofoil - Big Air
Gear: Moses Comet 111 2018
Peter Lynn Aero
Brand Affiliation: Infexion
Peter Lynn
Moses
Contact:

Re: Kite Manufacturing - free feedback

Postby evan » Thu Apr 19, 2018 8:12 am

That is no load bearing stitch. The canopy goes all the way to the leading edge underneath the dacron strip where it is fixed with the triple zigzag. But it doesn't look nice indeed!

ichabod
Medium Poster
Posts: 94
Joined: Tue Jan 21, 2014 12:35 pm
Kiting since: 2
Gear: kite, strings, short wooden plank
Brand Affiliation: None

Re: Kite Manufacturing - free feedback

Postby ichabod » Thu Apr 19, 2018 9:01 am

Cheap zips on kite bags are a bad idea (looking at you North) Either use high quality ones or even better make a zipperless design using toggles and flaps - far more sensible!

User avatar
Kamikuza
Very Frequent Poster
Posts: 5666
Joined: Fri Jan 09, 2009 4:49 am
Local Beach: Sabae Beach
Favorite Beaches: Ol' Stinky
Gear: This, that, the other

Re: Kite Manufacturing - free feedback

Postby Kamikuza » Thu Apr 19, 2018 10:55 am

ichabod wrote:
Thu Apr 19, 2018 9:01 am
Cheap zips on kite bags are a bad idea (looking at you North) Either use high quality ones or even better make a zipperless design using toggles and flaps - far more sensible!
Use big plastic zips and zippers. Metal invariably oxidizes or whatever it is that it does. All the metal zippers on the bags for kites that have sat in the shed over last summer and winter have seized. None were exposed to salt water or air...

User avatar
downunder
Very Frequent Poster
Posts: 1428
Joined: Mon Jul 01, 2013 7:16 am
Kiting since: 1970
Gear: building my own
Brand Affiliation: None
Location: Perth, Australia

Re: Kite Manufacturing - free feedback

Postby downunder » Thu Apr 19, 2018 2:58 pm

Yep,

Open a new thread for bags ;)

User avatar
Kamikuza
Very Frequent Poster
Posts: 5666
Joined: Fri Jan 09, 2009 4:49 am
Local Beach: Sabae Beach
Favorite Beaches: Ol' Stinky
Gear: This, that, the other

Re: Kite Manufacturing - free feedback

Postby Kamikuza » Thu Apr 19, 2018 3:24 pm

downunder wrote:
Thu Apr 19, 2018 2:58 pm
Yep,

Open a new thread for bags ;)
:lol: I don't think "use nylon not metal" needs much discussion...? The rest of bag design is almost irrelevant :D

User avatar
marlboroughman
Very Frequent Poster
Posts: 2813
Joined: Thu Feb 08, 2007 5:12 pm
Kiting since: 2005
Style: Oldschool
Gear: Switch
Brand Affiliation: Make Kiting Great Again!
Location: CubaKiteLessons.com
Contact:

Re: Kite Manufacturing - free feedback

Postby marlboroughman » Thu Apr 19, 2018 5:36 pm

2015 kite destroyed by the unnecessary webbing!!!
thumbnail_20180419_120257.jpg
Dacron failed from creasing created by webbing shrinkage. I will fix it and remove all the webbing reinforcements. This kite would end up in a dumpster if it wasn't 2015 Catalyst.

Except for line attachments and rescue handles webbing doesn't belong on a kite. But, but what if the giant wave ate it? I don't need a piece of fucking webbing as a souvenir.

Cabrinha has the best strut to LE connection. Flexible kevlar aramid cloth, which doesn't require any garbage webbing on a dacron reinforcements but they still use it and it shrinks including on the LE closing seam. Why? Because they like to make it look "bomb proof" :roll:

Faxie
Very Frequent Poster
Posts: 694
Joined: Tue Jun 19, 2012 10:39 pm
Kiting since: 2011
Local Beach: Netherlands. Maasvlakte, Slufter, Scheveningen, Domburg, Rilland, Brouwersdam, Ouddorp, Binnenschelde, Vrouwenpolder, Oostvoorne, Rockanje, Grevelingen, Borssele.
Style: Freeride, freestyle, wave.
Gear: Switch Helium V1 18m Element V3 13m-7m V4 9m-5m Legacy V1 10m-14m Slingshot Fuel 2005
Switch MJComp V2 136x41.5 Firewire Hellrazor 6.1 timbertek Shinn Shinnster Nobile 555 125x38
Brand Affiliation: None

Re: Kite Manufacturing - free feedback

Postby Faxie » Thu Apr 19, 2018 6:19 pm

Cabrinha doesn't have webbing on the closing seam? Only insignia cloth like most others. They do have webbing on the bending part of the struts however.

Don't you mean Switch? They're one of the few that have webbing on the closing seam. Good luck getting that seam to fail btw...

I've seen more failures on struts without webbing than with webbing, for what it's worth... exception being the double seam struts.

User avatar
marlboroughman
Very Frequent Poster
Posts: 2813
Joined: Thu Feb 08, 2007 5:12 pm
Kiting since: 2005
Style: Oldschool
Gear: Switch
Brand Affiliation: Make Kiting Great Again!
Location: CubaKiteLessons.com
Contact:

Re: Kite Manufacturing - free feedback

Postby marlboroughman » Thu Apr 19, 2018 11:48 pm

Faxie wrote:
Thu Apr 19, 2018 6:19 pm
Cabrinha doesn't have webbing on the closing seam?
It does. It is very fine, light weight but it still shrinks. Every time I open Cabrinha LE I am missing 1-2 inches of the webbing when I put it back together that's how much it was shrunk and I can't stretch it back. The FX doesn't have and it is a good thing. I don't know about the new ones.


Return to “Kitesurfing”

Who is online

Users browsing this forum: Google [Bot], rogue_kiteboarder and 34 guests