Instinct Sport 2007

From Wiki
Revision as of 15:21, 5 August 2008 by Toby (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Brand: Ozone

Sizes:

  • 7.0
  • 9.0
  • 11.0
  • 13.0
  • 15.0

Contents

Description

The Sport is the 2nd generation of the original Instinct, offering the ultimate kite for all riders in all conditions. While it keeps the same concepts of its instigator this new breed is refined and rebuilt to offer even more. We reduced the overall weight and dropped from 7 to 5 struts while still maintaining that legendary Instinct stability.

A new plan form along with reshaping the leading edge and wing tips, all adding to a more powerful and faster turning kite. It still excels unhooked, still loves the gusts and keeps its huge ‘One Kite’ wind range.

The feedback from the Original Instinct is amazing. Still, we sought to improve upon it and absorbed all of the input from riders around the world. We are proud to say that this year the reverse launch is much improved, especially in lighter winds. Compared with the previous Instinct, you will also notice thinner struts and a completely new wingtip shape.

The Instinct Sport has a progressive curve across the leading edge which is more swept than the original. The Y bridle back line configuration ensures the power from the back lines is applied to the correct part of the tip during the turn to keep the power constant and direct. The turn is initiated at the bottom of the tip, creating a faster reaction time, then, as the kite moves through the turn, the power is smoothed out and comes from further up the tip until it reaches the top of the bridle. Again, No Pulleys in the kite = equals more DIRECT TIP STEERING and that good ole Ozone feel.

The Sport comes with the “One-Pump” inflation system to maximize efficiency and get you on the water quicker. Simply pump air into the leading edge and the entire kite inflates together simultaneously. The One-Pump system has clips to shut off pressure to individual struts, which is recommended to isolate each strut once inflated. Ozone has implanted neoprene covers over the clips and connection points to protect them during use and when packed away. This simple yet effective device can be rolled back when using the clip and then replaced to guard it. Ozone is a License payee of the Patent approved One-pump system

  • Easy relaunch even in light gusty winds
  • Total yet smooth progressive depower –the experts preference
  • Huge lift and hang-time
  • Flag Our System
  • Fast handling – Quick turning
  • Excels un-Hooked – no stall tendency
  • Huge wind-range >> Low end and High end
  • Upwind riding Performance – Points High into the wind
  • 07 Bar design with integrated flag out safety and O-Shit handle
  • New pump for 07 with pressure meter
  • Bullet Proof Construction
  • Aerodynamic scuff pads on LE
  • “One-Pump” system with neoprene protection when packed
  • Sport >> The “new-school” freestylers choice

Features

Span Lines

Whilst designing the original Instinct in 2005 we noticed the problem that all flat kites suffer if they are allowed onto their back when crashed onto the water.

In this situation all BOW/SLE/Hybrid/Flat kites will invert if the rider, particularly a beginner does not keep tension on the back lines by pulling the bar in once the kite has crashed. To us this wasn’t acceptable so we added what we call span lines.

Our span lines do not hold any tension when the kite is in-flight. It does not add stability like many thought, it merely stops the instincts from being able to flatten out. If you are an above average rider you do not need the span lines and that is why we have only attached them with a larks foot knot. We recommend that you leave them attached as supplied from the factory.

Anti Scuff Pads

Keeping the leading edge ultra light but at the same time protecting the structural stitching, these Dacron anti scuff pads ensure that the leading edge stitching remains intact when the kite is dragged along the ground during self launch or landing. A light weight leading edge is the key to an aerodynamic kite’s performance. No battens and no lumpy, drag inefficient heavy scuff pads ensure this. Battens also weaken the cloth as its more weight in the wrong place flapping and stretching the material around the batten ends >> far from ideal.

New Planform & Tip shape

The Instinct’s tip has been designed with water relaunch and turning speed in mind, it is more swept and the Y bridle configuration ensures the power from the back lines is applied to the correct part of the tip during the turn to keep the power constant and direct. The turn is initiated at the bottom of the tip, creating a faster reaction time, then, as the kite moves through the turn, the power is smoothed out and comes from further up the tip until it reaches the top of the bridle. No pulleys here mean DIRECT TIP STEERING.

New Strut Ends

Chamfered strut tips. The tips of the strut on the Instinct have been swept to a more aerodynamic shape, improving the airflow release and also eliminating the chances of the lines catching on the tip during launch or relaunch.

Anti line catch mesh

The leading edge of the Instinct is supported by a bridle, if the kite hits the water then the bridle and lines can become slack and catch on the valves. This simple mesh design stops the bridle lines from becoming wrapped round the inflation valves and opening them inadvertently. It also keeps the airflow smoother over the valve area, adding to the kites performance.

Anti-Line Catcher > LE Tip

For the 2007 models we have added a simple anti-line catcher to the tip ends that help ensure lines roll of the end of the leading edge to avoid line hang-ups which can create an un-safe launch situation. You will notice that we have designed this simple yet effective anti-line catcher with webbing but with a solid insert so it actually works. Other companies just add webbing which still allow the kite lines to get caught between the sail and the leading edge tube.

Ultra thin struts

The thinner the strut the faster the kite and the less performance is lost from disturbed airflow. These struts have been reduced to the minimum possible size without compromising structural stability.

High quality workmanship

The Ozone team have over 15 years of paragliding design and manufacturing experience which results in amazing craftsmanship and stress management, accurate stitching only where necessary. Self Rescue handles, Anti scuff pads and Strut base reinforcement are all visible here.

Bullet Proof Construction

Reinforced bridle points and anti scuff pads. Extra material is placed inside the leading edge for bombproof attachment points. The scuff pad stitching is not structural; it only holds the pad in place, all the structural stitching is beneath the scuff pad.

Bladders

The bladders on all instincts are made from the highest grade of PU with double layers of PU at both ends of the struts (see picture). This extra layer adds protection in the right area and is one of the reasons Ozone bladders are leading the industry.

Materials

Our philosophy has always been to use only the finest materials available for any of our products and for our Kitesurf range this is no different. Tube kites take a particularly harsh beating due to the sand and salt environment therefore we decided to use the industries tried and tested sail cloth to ensure our kites keep their designed factory trim even after hundreds of hours of use.

Main sail

For the main body of the sail we have used Tejin Polyester Rip-stop. Not the cheapest material option but by far the best material available in the industry

LE & Struts

For the leading edge and struts we have chosen Dimension Polyant Dacron, also the leading Dacron manufacturer in the World. The structural part of a tube kite takes unbelievable amounts of stress and its imperative that a quality cloth is used otherwise the kites characteristics will change

Bladders

We use the leading PU material for all our bladders and we are meticulous with their production to ensure you have a bladder that will not fail during normal use. Bladders can be a kiter’s worst nightmare; it was ours before we started making our own LEI’s! We use the finest valve machine available to electrically join the valves to the leading edge and struts.

Manual

PDF

Download PDF

Pictures

Instinct Sport 2007 16012.jpg

Instinct Sport 2007 14858.jpg

Instinct Sport 2007 tn SPORT MONTAGE.jpg

Instinct Sport 2007 tn DSC0034.jpg

Instinct Sport 2007 action 1.jpg

Videos

Reviews

English

Instinct Sport 2007 13.0 - fekc.org

Instinct Sport 2007 13.0 - sbckiteboard.com

Trim Tips

Performance Modification

Moving the front line attachments at the LE (depending on the size) between 9 & 13 cm further up and the results are:

  • twice the de-power
  • twice the bar feeling
  • far better low end (you really feel the kite/bar in low winds) and gain a good 2 knots low end

You need a kite repair shop for this work.

Personal tools