Contact   Imprint   Advertising   Guidelines

Dwarfcraft 4’6” to Dwarfcraft 3’6”?

A forum dedicated to Hydrofoil riders
User avatar
junebug
Frequent Poster
Posts: 439
Joined: Sat Jan 04, 2014 4:14 pm
Kiting since: 2006
Weight: 195 lbs
Style: Freeride Twintip, Strapless Foil
Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
Brand Affiliation: None
Has thanked: 42 times
Been thanked: 63 times

Dwarfcraft 4’6” to Dwarfcraft 3’6”?

Postby junebug » Wed Jul 11, 2018 3:12 am

I’m currently riding a Dwarfcraft 4’6” with a Lift 150 foil. I’m riding strapped. I have the mast position so the back of the mast plate is at the 3cm marking.

I’m trying out a friend’s Dwarfcraft 3’6” tomorrow. The mast plate markings on the 3’6” are at different locations relative to the back of the board and I can’t really tell where I should set the mast so I have approximately the same amount of lift. It looks to me like the back of the mast plate needs to be at like the 8cm setting or so, but that seems like it can’t possibly be right.

Does anyone have experience with this? Where should I set the mast so I have the same lift? Obviously, I’ll take a screwdriver out to the beach to make any adjustments, but I’d love some guidance if anyone has dealt with this.

Thanks in advance.

grigorib
Very Frequent Poster
Posts: 4147
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 691 times

Re: Dwarfcraft 4’6” to Dwarfcraft 3’6”?

Postby grigorib » Wed Jul 11, 2018 4:05 am

Place your assembled setup and align it with 3’6” board upper deck to upper deck to match position.
Or you can measure/match length from back end of the board to the back edge of the mast plate.
I’d say you’re probably standing with your back foot above rear mast plate bolt, it’ll take just couple of starts and tacks to adjust feet position and then you’d move the mast if there’s not enough or too much of back foot pressure.

Some might think that riding strapless allows you to stand anywhere which is technically true, but your feet kind of like that sweet spot they’re used to :)

I switched from 4’6” to 3’6” long time ago and I’m never going back except occasionally I try others’ foils with different boards than mine

oregonkiter
Frequent Poster
Posts: 256
Joined: Mon Sep 11, 2017 2:26 pm
Style: foil
Gear: Foil stuff
Brand Affiliation: None
Has thanked: 4 times
Been thanked: 53 times

Re: Dwarfcraft 4’6” to Dwarfcraft 3’6”?

Postby oregonkiter » Wed Jul 11, 2018 5:00 am

I would advise starting with the 150 plate all the way back. Adjust forward if needed.

User avatar
junebug
Frequent Poster
Posts: 439
Joined: Sat Jan 04, 2014 4:14 pm
Kiting since: 2006
Weight: 195 lbs
Style: Freeride Twintip, Strapless Foil
Gear: Rebels (6m, 8m, 11m, 13m)
Nobile NHP
Boxers (3.5m, 4m, 5m, 7m, 10m, 12m) (flat water)
Peak4s (3m, 4m, 5m, 6m) (waves)
Lift 150 v1 Surf front / 38 back (flat water)
Lift 170 v1 Surf front / 26 back (waves)
Brand Affiliation: None
Has thanked: 42 times
Been thanked: 63 times

Re: Dwarfcraft 4’6” to Dwarfcraft 3’6”?

Postby junebug » Thu Jul 12, 2018 4:18 am

Thanks for the recommendations. I put the foil at the 3cm mark, which is actually much closer to the back of the board than the 3cm mark on the 4’6”. Even though the stance with straps is narrower, it required more back foot pressure, but not so much more that I bothered to change it.

Also, I absolutely loved it. Riding a smaller board is so much fun.

palmbeacher
Frequent Poster
Posts: 299
Joined: Wed Jul 13, 2016 6:53 pm
Kiting since: 2011
Gear: Lift foils + Cabrinha kites
Has thanked: 52 times
Been thanked: 27 times

Re: Dwarfcraft 4’6” to Dwarfcraft 3’6”?

Postby palmbeacher » Thu Jul 12, 2018 6:21 pm

Also riding 3’6 majority of time now, so much fun! Only using my Alien Air for very light winds.


Return to “Hydrofoil”

Who is online

Users browsing this forum: Google [Bot] and 150 guests